VLT RGB 17 000 Pro Mapping is an automated all-weather laser projector for 3D mapping (also known as laser mapping, omapping, mapping, 3D mapping, projection mapping, projection show, and projection mapping). Our laser equipment projects bright and colorful images onto various surfaces. Unremarkable structures are instantly transformed into a fairy tale, representing a new generation in architectural laser lighting and captivating laser shows.

Key features:

• Total laser power of 17,000 mW with digital adjustment and independent thermal stabilization
• All-weather design with thermal stabilization system that works at any temperature
• Professional galvanometric scan with a speed of up to 60kpps and an opening angle of 70°
• Internet and Wi-Fi control with the ability to stream and work offline
• The package includes the Pangolin FB-4 software and a laser show base
• Automation of systems with a work scheduler, remote access, and process robotization
• Certification according to GOST 31581-2012 and SanPin 5804-91 for work in places of mass gathering

Technical specifications:

• Manufacturer — High Laser Technologies
• Country of origin — Russia
• Model name — VLT RGB 17 000 Pro Mapping
• Device type — all‑weather laser projector for mapping
• Purpose — laser vector mapping on any surfaces
• Working area — from 0.1 to 1000+ square meters
• Device colour mode — full colour (RGB), 256 colours
• Maximum power: 17,000 mW (digital power control is installed)
• Red emitter: power 5,000 mW, divergence 0.95 mrad, aperture 5×5 mm, service life 10,000 hours
• Blue emitter: power 8,000 mW, divergence 0.95 mrad, aperture 4×5 mm, service life 10,000 hours
• Green emitter — power: 4000 mW, divergence: 0.9 mrad, aperture: 4 mm, service life: 10,000 hours.
• Scan type — galvanometric (scanner).
• Operating speed — up to 60 kpps (5 degrees), 40 kpps (30 degrees).
• Image coverage — from 0 to 70 degrees along each axis (X, Y), electronic control and geometry correction.
• Frames per second — 33.3 frames (FPS), no image flicker effect.
• Power supply — 220V, 50Hz, power consumption no more than 400W, adapted for operation from a vehicle converter.
• Warranty — 1.5 years + 5 years of service, warranty card and technical documentation. passport

VLT RGB 9 000 Pro Mapping is an automated all-weather laser projector for 3D mapping (also known as laser mapping, omapping, mapping, 3D mapping, projection mapping, projection show, and projection mapping). Our laser equipment projects bright and colorful images onto various surfaces. It instantly transforms ordinary buildings into a fairy tale, representing a new generation in architectural laser lighting and stunning laser shows.

Key features:

• All-weather design with thermal stabilization for operation in any temperature conditions.
• RGB colority with 256 colors and a total power of 9000 mW for bright projections.
• Work area up to 450 m² with galvanometric scanning up to 60kpps.
• Internet and Wi-Fi control with standalone memory for operation without a PC.
• System automation: scheduler, emitter protection, and robotization.
• Comes with Pangolin software package for preparing graphics.
• Certification of the Russian Federation according to GOST 31581-2012 and SanPin 5804-91 for safety.
• 1.5 years warranty and 5 years service with training.

Technical specifications:

• Manufacturer - High Laser Technologies
• Country of origin - Russia
• Model name - VLT RGB 9 000 Pro Mapping
• Device type - all-weather laser projector for mapping
• Purpose - laser vector mapping on any surfaces
• Operating area (dark hours, average background lighting level) from 0.1 to 450+ square meters
• Device color capacity - full-color (RGB), 256 colors
• Maximum power - 9,000 mW (digital power control is installed)
• Red (wavelength 635 nm), independent thermal stabilization - power 2,000 mW, divergence 0.95 mrad, aperture 5x5 mm, service life 10,000 hours.
• Blue (wavelength 450 nm), independent thermal stabilization — power 4000 mW, divergence 0.95 mrad, aperture 4×5 mm, service life 10,000 hours.
• Green (wavelength 532 nm), independent thermal stabilization — power 2000 mW, divergence 0.9 mrad, aperture 4 mm, service life 10,000 hours.
• Additionally, regarding the emitters: analog color control, vibration resistance, multi‑lens optics, beam correction, a full‑fledged instrument alignment system.
• Emitter protection — startup test, intelligent system for protecting and blocking laser emitters based on temperature, with an LCD status screen.
• Scan type — galvanometric (scanner).
• Operating speed — up to 60 kpps (5 degrees), 40 kpps (30 degrees).
• Image coverage — from 0 to 70 degrees along each axis (X, Y), electronic control and geometry correction.
• Frames per second (at 40 kpps, 1200 points) — 33.3 frames (FPS), no “image flicker” effect.
• Laser graphics capability — vector type, (2D–3D) graphics, animated clips, text, dynamic animation, static images.
• All‑weather design — the device is independent of external temperature conditions.
• The housing type (using the “thermobox” technology) is steel; the device has thermal insulation (a thermal shield).
• The device’s thermal stabilization (integrated, with individual power supply) includes a heating system and active and passive cooling, controlled by an integrated microcontroller with an LCD.
• Automation — an automatic module. start/stop control. of the device’s operation based on time (scheduler), automatic start of graphics with rewritable autonomous memory.
• Projector controls (laser controller with an LCD display included) — Lan (Internet), SD, ILDA, internet control with the ability to stream laser graphics over the network, remote access to rewritable memory, control without a PC.
• The supplied software part is software for independently preparing laser graphics based on Pangolin FB-4, additional software + laser show database.
• Robotization — if necessary, operation without computer or human involvement, autonomy.
• Power supply: 220V, 50Hz, power consumption not exceeding 400W, adapted for starting from a car converter.
• Warranty (documentary) – 1.5 years + 5 years of service, warranty card and technical documentation. passport,
• Additionally — assistance with mastering the equipment, training, and legal consulting.

VLT RGB 6 000 Pro Mapping is an automated all-weather laser projector for 3D mapping (also known as laser mapping, omapping, mapping, 3D mapping, projection mapping, projection show, and projection mapping). Our laser equipment projects bright and colorful images onto various surfaces. Unremarkable structures are instantly transformed into a fairy tale, representing a new generation in architectural laser lighting and stunning laser shows.

Key features:

• Total power of 6000 mW with digital adjustment for bright mapping.
• All-weather design with thermal stabilization for operation in any conditions.
• System automation: scheduler, Wi-Fi/LAN control, and autonomous operation.
• Pangolin FB-4 software for creating graphics, show base, and training are included.
• Russian Federation certification according to GOST 31581-2012, safety for mass events.
• Work area up to 200 m² with color graphics and a scan rate of 60kpps.

Technical specifications:

• Manufacturer — High Laser Technologies
• Country of origin — Russia
• Product name — VLT RGB 6 000 Pro Mapping
• Device type — all‑weather laser projector for mapping
• Purpose — laser vector mapping on any surfaces
• Operating area (dark hours, average background lighting level) from 0.1 to 200 square meters
• Device colour capability — full‑colour (RGB), 256 colours
• Maximum power: 6,000 mW (digital power control is installed).
• Red (wavelength: 635 nm), independent thermal stabilization — power: 2,200 mW, divergence: 0.95 mrad, aperture: 5×5 mm, service life: 10,000 hours.
• Blue (wavelength 450 nm), independent thermal stabilization — power 2600 mW, divergence 0.95 mrad, aperture 4×5 mm, service life 10,000 hours.
• Green (wavelength 532 nm), independent thermal stabilization — power 1200 mW, divergence 0.9 mrad, aperture 4 mm, service life 10,000 hours.
• Additionally, regarding the emitters: analog color control, vibration resistance, multi‑lens optics, beam correction, a full‑fledged instrument alignment system.
• Emitter protection — startup test, intelligent system for protecting and blocking laser emitters based on temperature, with an LCD status screen.
• Scan type — galvanometric (scanner).
• Operating speed — up to 60 kpps (5 degrees), 40 kpps (30 degrees).
• Image coverage — from 0 to 70 degrees along each axis (X, Y), electronic control and geometry correction.
• Frames per second (at 40 kpps, 1200 points) — 33.3 frames (FPS), no “image flicker” effect.
• Laser graphics capability — vector type, (2D–3D) graphics, animated videos, text, dynamic animation, static images.
• All‑weather design — the device is not dependent on external temperature conditions.
• Housing type (using “thermobox” technology) — steel, thermal insulation of the device (heat shield).
• Thermal stabilization of the device (integrated, with individual power supply) - heating, active and passive cooling system controlled by an integrated microcomputer with LCD
• Automation is an automatic module. start-stop. time-based operation of the device (scheduler), automatic start of graphics with rewritable offline memory
• Projector controls (laser controller with LCD display included) Lan (Internet), SD, ILDA, Internet control with the ability to stream laser graphics over the network, remote access to rewritable memory, control without a PC.
• The supplied software component is software for independently preparing laser graphics based on the Pangolin FB-4, additional software + a database of laser shows.
• Robotization — if necessary, operation without the involvement of a computer or a person, autonomy.
• Power supply — 220V, 50Hz, power consumption no more than 400W, adapted for operation from a vehicle converter.
• Warranty (documentary) — 1.5 years + 5 years of service, warranty card and technical documentation. passport,
• Additionally — assistance with mastering the equipment, training, and legal consulting.